Lifting
Rail Wagon Unloading System
Rapid and safe material unloadingA shunting transshipment port for bulk goods requires a facility with which railway wagons could be unloaded rapidly and safely. Loads of up to 100 tons could not should be lifted and tipped in this case.
Gangways
Robust, variable and compactGangways and ship access systems must be adjustable in longitudinal and transverse directions as well as for the height for different models and sizes of vessels so that safe access for passengers and crew is ensured.
Sectional door drive units
Moving doors with weights of several tonnesDoors which weigh several tons e.g. in hangars or industrial halls must be reliably opened and closed, so neither people may be injured nor objects may be damaged. A combination of diverse technical drive components provides a trouble-free application.
Counter weight handling for belt tensioner
Bulk material from mines is transferred to wagons by means of belt conveyorThe material is first transferred to the storage vessel of 650T and then to the carriage of 80T and thereafter to the holding bucket of 35T. Major shutdown in conveyor occurs when the belt shears and whole Counter wt. comes down. The chain pulley block was replaced by the two fall Pi drive system. The system is driven by two synchronized motors with end fastner attached to the counter weight and load limiters at respective ends
Lifting equipment for final vehicle assembly
Variable height for ergonomic workingVehicles attached to load frames must be traversed variably in height to enable ergonomic working during final assembly. The load frames must not hereby swing in the horizontal axis and only limited installation space is available for the drive unit.